2007 jeep liberty resistor values

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108110
Printed Date: July 09, 2025 at 7:11 PM

Topic: 2007 jeep liberty resistor values

Posted By: sneakycyber
Subject: 2007 jeep liberty resistor values
Date Posted: October 12, 2008 at 4:46 PM

Remote start System is a DEI Valet Model 562T with a DEI 556 UW transponder bypass module.

DOH! After further research the wiring diagram for the vehicle I am working on 2007 Jeep liberty 3.7 with standard audio is completely different than the 2008 2.8 T/D with Infinity that I used and I don't need all the resistors. Do I still need the keysense resistor Audiovox doesn't list one on their tech SVc website. Thanks for the help a little rusty after a few years out of the industry.

Edited 6:07 P.M. 10/12/2008

-------------

Replies:

Posted By: Big Dog
Date Posted: October 14, 2008 at 10:10 AM

If I understand correctly, you're asking about the multiplexed start/acc resistors. These aren't needed for the 07 Liberty.

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Posted By: sneakycyber
Date Posted: October 14, 2008 at 11:30 AM

Thanks for the reply

-------------

Posted By: sneakycyber
Date Posted: October 20, 2008 at 6:02 PM

Update install went without problems. I used a 220 ohm resistor for the parking lights. That's all I needed. Thanks for the help posted_image

-------------