Print Page | Close Window

viper 5701, how to reset alarm?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108139
Printed Date: July 12, 2025 at 5:46 PM


Topic: viper 5701, how to reset alarm?

Posted By: italicizedspong
Subject: viper 5701, how to reset alarm?
Date Posted: October 13, 2008 at 10:43 PM

Ok i recently installed a Viper 5701 alarm in my car. It was working fine for a little over a month. I forget to hook up the trunk pin wire so i took it all apart and hooked up that wire so the alarm actually goes off if the trunk is opened. Now, when i lock my car my alarm goes off about 30 seconds after locking it, no matter where i am. i silence the alarm and keep it armed and it doesnt go off again.

i checked the led and it says that the alarm was triggered by the shock sensor(blinks 2 times, zone 2). although i didnt move or re-wire anything but the trunk wire when i took everything apart. so i took it apart today and checked all the wires and moved the control module to a different spot and put everything back together. it still does it... any suggestions? btw i never hooked up another fuse to the 12V constant wire besides the 15A one thats already there...would that make a difference? just doesnt make any sense to me considering i didnt change anything. any way i can completely reset the alarm all together?

-Andrew



Replies:

Posted By: KarTuneMan
Date Posted: October 14, 2008 at 7:36 AM

Put a diode in line on the trunk trigger

AND, year make and model......???



-------------



Posted By: italicizedspong
Date Posted: October 15, 2008 at 2:16 PM
92 dodge spirit


Print Page | Close Window