’04 chevy express van, alarm/remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108144
Printed Date: May 14, 2024 at 12:20 PM

Topic: ’04 chevy express van, alarm/remote start

Posted By: sadkins
Subject: ’04 chevy express van, alarm/remote start
Date Posted: October 14, 2008 at 10:44 AM

I am installing an Autopage RS-1000 remote-start alarm in a 04' chevy express van and I am not shure if I need an immobilizer or passlock2 to make it all work. The van does not have a factory alarm and has a regular key. I was given an XK01 (directed Electronics) interface unit; is this the correct one? if it is, how do I wire it in?

Thanks

Replies:

Posted By: ckeeler
Date Posted: October 14, 2008 at 2:54 PM

That is the correct unit you need. gm's use a resistance based system that is built into the lock cylinder.

Posted By: sadkins
Date Posted: October 15, 2008 at 3:50 PM

Thanks for the reply,I have another question: I am looking at the XK01 on the www.expressdownload.com website and it is talking about a vehicle type numbered 1-7;I do not see the express van listed here..... How will I know if when connected, this unit actually works correctly?

Posted By: chriswallace187
Date Posted: October 16, 2008 at 3:30 PM

The XK01 with AMDL isn't listed as the correct bypass for any year of Express Van; however if that's what you have already you can probably use it.
I would suggest programming it for vehicle type 2 since that's the closest thing to your van in regards to the way the data is communicated. If that doesn't work, try type 4.

-------------
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two

Print Page | Close Window