Print Page | Close Window

97 explorer dome light

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108229
Printed Date: May 02, 2024 at 3:26 AM


Topic: 97 explorer dome light

Posted By: nbcadillac
Subject: 97 explorer dome light
Date Posted: October 18, 2008 at 10:43 AM

I will be installing an Excalibur RS-22 on a 1997 Ford Explorer. There is nothing in the install manual about domelight supervision. From what i see the wire in the vehicle is BLACK/ light blue and +. Could someone please explain how i can wire dl supervision... Thanks.



Replies:

Posted By: chriswallace187
Date Posted: October 19, 2008 at 2:00 PM
I can't find a manual for that RS-22, but I'm assuming it's the same as the MARS22 which is also made by Omega. If you could verify that by going to MARS-22.pdf and comparing the wiring diagram on the last page to yours it would be helpful.

There are 2 possible ways you can do domelight supervision on your car.

1. If turning the key to unlock in the driver's door(without opening the door) activates the domelight, then just connecting the OEM disarm wire from the Excalibur to the factory disarm wire on the Explorer will be sufficient.

2. If the key in the doorlock doesn't turn the domelight on, I would suggest using a 528T pulse timer, activated by the (-) unlock wire from the Excalibur.

-------------
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two


Print Page | Close Window