Print Page | Close Window

automatic doorlock arm system itself

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108240
Printed Date: May 13, 2025 at 10:05 PM


Topic: automatic doorlock arm system itself

Posted By: spawn288
Subject: automatic doorlock arm system itself
Date Posted: October 19, 2008 at 12:33 AM

I Everybody ..!

I installed a Carvox CX-999 in a 2004 Seebring Sedan and here's my problem, I hook up the lock and unlock wire whit resistance to the WHITE/ green wire... the lock and unlock work perfect but I have a factory automatic lock system(the door lock automaticly when you got a certain speed) and when the door lock the system arm itself. should i install a diode between the system and the door lock wire ..?

Thank you,

Excuse my english im a french Canadian ..!




Replies:

Posted By: howie ll
Date Posted: October 19, 2008 at 10:25 AM
Yes



Posted By: spawn288
Date Posted: October 19, 2008 at 12:31 PM

Thank you ..!!!

By the way how do you correct my thread title .. ??? I tried but I didn't find any Edit button after I posted it .


Print Page | Close Window