courtesy lights, 08 f-250
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108260
Printed Date: May 15, 2024 at 1:53 PM
Topic: courtesy lights, 08 f-250
Posted By: flybyu
Subject: courtesy lights, 08 f-250
Date Posted: October 20, 2008 at 2:41 AM
I have 2008 ford f-250 with a dealer installed viper 5900 and what don't like about the install is. When i'd unlock my doors with the factory alarm my headlights would turn for a couple of minutes and i want that back. I imagine i'd need to add another relay to the domelight supervision output but where do i tap into the headlights at. I was just thinking about tapping into the (+) when the headlights are on wire but won't that feed back into the relay. Somebody has had to of figured this out on here. Any help would be appreciated.
Replies:
Posted By: ckeeler
Date Posted: October 20, 2008 at 11:39 AM
all you need to do is tie into the headlight wire using a relay. when the headlights are on while you drive it will not feed back into the realy because that relay will only actvate for a short time after you disarm.
|