1990 lincoln and astrostart

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108346
Printed Date: May 16, 2025 at 10:24 PM

Topic: 1990 lincoln and astrostart

Posted By: mybimota
Subject: 1990 lincoln and astrostart
Date Posted: October 22, 2008 at 10:43 PM

i have installed a astrostart RSS-5224 with alarm into my car but i need some info..

what wire do i need to connect from the astrostart to
"Factory Disarm ....Dark GREEN/ Purple (-)"

my second question is for the astrostart internal relay for secondary accessories. how would the relay contact 30, 87a and 87 connect?

the car is a 1990 lincoln mark 7.

thanks in advance

Replies:

Posted By: KarTuneMan
Date Posted: October 23, 2008 at 12:30 AM

Use the p2 pin 13, brown, this is default "pulse before" This will pulse on unlock, and before remote start.

The p5 relay would be wired like this. pin#3 is 87 on the relay, take this to 12V constant.

Take pin#1 to your second accs. This is 30 on the relay. You will then need to program leval 9 for accs.

-------------

Posted By: mybimota
Date Posted: October 25, 2008 at 8:52 PM

thank you

this is my first install and it went pretty good(i think)
did alot of reading and searching....but only thing stumped me was this...
thanks again

Print Page | Close Window