96 nissan pathfinder doorlocks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10846
Printed Date: August 15, 2025 at 10:33 PM

Topic: 96 nissan pathfinder doorlocks

Posted By: mxxmikexx
Subject: 96 nissan pathfinder doorlocks
Date Posted: March 13, 2003 at 3:43 PM

i just did a 96 pathfinder today, and i was wondering if anyone had an easy way to tag the door lock wires, i got them at the keyless module under the drivers side dash, but i had to unbolt the module and force it in to submission to get to the wires, is there an easier way to get the doorlock wires?

Replies:

Posted By: BNLUIS
Date Posted: March 13, 2003 at 3:56 PM

yes, remove the 2 screws holding the fusebox,lift fusebox and pull towards you. There you will see the harness leading to the module, also there you will find you factory arm/disarm wires.

-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.

Posted By: Velocity Motors
Date Posted: March 13, 2003 at 3:56 PM

You could have gotten them at the WHITE 16 pin connect at the lower driver's kick panel. (-) trigger and same colors as the alarm module/keyless entry.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window