Print Page | Close Window

pulsing door pin for auto headlights

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108534
Printed Date: July 02, 2025 at 1:24 PM


Topic: pulsing door pin for auto headlights

Posted By: wingman01
Subject: pulsing door pin for auto headlights
Date Posted: October 30, 2008 at 12:36 AM

Hi there,  I have a 08 nissan Titan with auto headlights and python 950 remote start. The headlights stay on when remote starter off.

After doing some research I realized I need to pulse the Lt. Blue doorpin wire(neg.)

I'm not positively sure how to do this but I think just use the auxillary harness H2/2 factory rearm output without ant relays to send a pulse to the

doorpin wire.  The maual says that this wire sends a negative pulse any time the remote start shuts down or the doors are locked

Pretty new at this stuff so any replies would be appreciated thanks!




Replies:

Posted By: KPierson
Date Posted: October 30, 2008 at 7:50 AM
That should do the trick!

-------------
Kevin Pierson



Posted By: wingman01
Date Posted: October 30, 2008 at 10:40 AM

Cool thanks,  I was hoping that it was that easy!


Print Page | Close Window