04 accord and compustar p2w9000fmr

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108579
Printed Date: July 05, 2025 at 3:13 AM

Topic: 04 accord and compustar p2w9000fmr

Posted By: kmongru
Subject: 04 accord and compustar p2w9000fmr
Date Posted: October 31, 2008 at 9:47 PM

hi, im planning to do an install in an 04 accord 5spd 4cyl and am wondering how hard it is to install the compustar p2w9000fmr? Im planning on using a DEI bypass module, are there any problems that i can potentially run into? anyone have any experience with these cars? also the compustar, how hard is it 2 self install? Ive always used DEI products and have never installed a compustar, and am wondering if theres anything i need 2 worry about? can I do simple programming myself? Any insight is appreciated. Im trying to get as much info as possible. cheers

Replies:

Posted By: wblakes
Date Posted: November 01, 2008 at 3:16 PM

CompuStar is easier to install because you don't have that extra relay pack that DEI have. on your car just be sure to test your wires because there are alot of wires in your kick panel and alot of the colors are the same. other then that, straight forward installation. good luck

Posted By: revolutionz_s13
Date Posted: November 01, 2008 at 3:23 PM

if you dont have the module, use an idatalink module....they are designed for the compustar systems and work very well in conjunction with them. https://www.idatalink.com

Posted By: KarTuneMan
Date Posted: November 01, 2008 at 9:25 PM

Let me know when you get stuck on the clutch bypass....

-------------

Posted By: kmongru
Date Posted: November 02, 2008 at 1:33 AM

lol oh geez i guess i gota research the clutch bypass before i start the job. i did a search and came across some info. also quick question? the accord has factory window roll up, can i easily pulse the lock?