Print Page | Close Window

96 tacoma, k-9 alarm, can’t unlock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108580
Printed Date: July 06, 2025 at 5:14 AM


Topic: 96 tacoma, k-9 alarm, can’t unlock

Posted By: time2dcaudio
Subject: 96 tacoma, k-9 alarm, can’t unlock
Date Posted: October 31, 2008 at 10:38 PM

I installed a K-9 Alarm keyless entry into a toyota tacoma 1996 and I have tried everything I know and so far I can get the system to lock and arm but I cat get to unlock, however it will disarm. Its a two wire system and the vehicle itself I believe is a negative pulse system but I'm stumped. What do I do? I have even replaced the brain and had to buy a new alarm. Somebody please tell me what I m doing wrong.

-------------
15,0000rms and 12 edx12s



Replies:

Posted By: mikvot
Date Posted: October 31, 2008 at 11:25 PM
What wire in the vehicle did you use for unlock? Did you test with a multimeter?

-------------



Posted By: i am an idiot
Date Posted: November 01, 2008 at 4:19 AM
     Power Unlock          RED / YELLOW          (-)          NEGATIVE TRIGGER          
     PowerLock          RED / WHITE          (-)          DRIVER'S KICK PANEL



Posted By: chadstrawn
Date Posted: November 02, 2008 at 3:37 PM
does it require double pulse?


Print Page | Close Window