561t, 2002 honda accord

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108599
Printed Date: April 29, 2024 at 12:33 AM

Topic: 561t, 2002 honda accord

Posted By: new_leaner
Subject: 561t, 2002 honda accord
Date Posted: November 01, 2008 at 6:00 PM

I have 561t RS and plan to install to my 2002 Honda Accord EX that has factory alarm and keyless entry. I read the installation guide couple times but some points I still get confused. My questions are:

1/ White (+/-)parking light Ouput (H1/9): 2002 Honda Accord wiring diagram has two parking light wires, 1 for (-) and the other for (+). Which wire can I connect H1/9 of 561T to my vehicle.

2/ GREEN/ Black (-) and GREEN / WHITE (-) ( Factory Alarm Rearm and Disarm): Also 2002 Honda accord diagram has only 1 Factory Alarm Disarm wire. How can connect these 2 wires.

3/ is 561T RS has some kind of relay buit in ? just like Anti-Grind built in ?

Anyone can help !!!

Replies:

Posted By: brhaugen
Date Posted: November 01, 2008 at 10:25 PM

1) there is a jumper you can use for setting + or - you can use what ever you like
2) only worry about the disarm wire - it will rearm with locking the doors
3) yes, there is an anti-grind relay built in

-------------
Brent Haugen
Fargo, ND

Posted By: new_leaner
Date Posted: November 01, 2008 at 11:20 PM

thanks brhaugen

1/ that mean I connect only 1 of the two wires in my vehicle ( because in the diagram says two parking wires - and + ) ?

Posted By: brhaugen
Date Posted: November 02, 2008 at 7:21 AM

Choose one and then set the RS unit for the correct polarity

-------------
Brent Haugen
Fargo, ND

Posted By: new_leaner
Date Posted: November 04, 2008 at 3:02 PM

thanks for your help Brent Haugen. I am waiting to have DEI XK05 to install 561t RS to my 2002 honda accord and still have confused with the GREEN/ Black (-) factory alarm disarm.

Should I connect this wire to the (-) Brown ( Ground When Running) of XK05 or connect to the factory disarm wire of my vehicle ?