2008 ford f250 6spd standard

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108685
Printed Date: July 20, 2025 at 4:44 PM

Topic: 2008 ford f250 6spd standard

Posted By: florencej
Subject: 2008 ford f250 6spd standard
Date Posted: November 04, 2008 at 11:39 PM

Bypassing the clutch for remote starter install Wondering how this is done and what wires I have 4 wires at the clutch switch 3 have 12V with ign on and two of them drop to 0V when pedal is dpressed. I am stumped I cannot get this unit to bypass the clutch

-------------
Fusion Electronics
Owner
Josh Florence

Replies:

Posted By: KarTuneMan
Date Posted: November 05, 2008 at 7:21 AM

What are you installing?

-------------

Posted By: florencej
Date Posted: November 05, 2008 at 11:17 AM

I am installing a Remote Start Unit and yes it is a manual unit. I have everything working except this stupid clutch bypass

-------------
Fusion Electronics
Owner
Josh Florence

Posted By: florencej
Date Posted: November 05, 2008 at 11:21 AM

sorry its an ultra start 1265M Unit

-------------
Fusion Electronics
Owner
Josh Florence

Posted By: KarTuneMan
Date Posted: November 05, 2008 at 7:38 PM

At the clutch switch find a blue/orange wire. Send a NEGATIVE start signal to this wire.

-------------

Posted By: florencej
Date Posted: November 05, 2008 at 7:51 PM

there is no blue/orange wire

-------------
Fusion Electronics
Owner
Josh Florence

Posted By: i am an idiot
Date Posted: November 06, 2008 at 11:10 PM

What color are the wires?

Print Page | Close Window