1995 saturn sl, power lock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108798
Printed Date: July 07, 2025 at 11:50 AM

Topic: 1995 saturn sl, power lock

Posted By: bengerman
Subject: 1995 saturn sl, power lock
Date Posted: November 10, 2008 at 5:19 AM

I have a 1995 saturn SL. Currently, i have power nothing, but i do have an aftermarket alarm (hornet 740t)

I'm looking to install power door locks, and i already have the actuators and switches off another saturn SL. The actuators have a lock and unlock wire, the switch has a lock, unlock, and ground.

I'm trying to figure out how to wire the actuators, adn i would like them to be activated by both the switches in my car and the alarm system.

Replies:

Posted By: bengerman
Date Posted: November 10, 2008 at 5:25 AM

i forgot to mention, i could not get the factory relay setup, so i need to use standard relays instead.

Posted By: ckeeler
Date Posted: November 10, 2008 at 12:24 PM

just go to the door lock/relay section on this site. use the wiring diagram for adding aftermarket actuators using relays. it will explain how to wire them up. tie in the unlock/lock wires from your switches to the same wires that come from the alarm to trigger the relays that way the switches work as well as the alarm to lock/unlock the doors.

Posted By: bengerman
Date Posted: November 11, 2008 at 11:55 AM

cool thanks!

Print Page | Close Window