Hi, im new to the alarm side of car electronics. Speakers and subs are more my thing. I have an 01 Aztek with the Omega Max-E alarm and was wondering if anyone could help me with how to conect the Au-93-4 to this so that all the windows go up when I hit the lock on the remote. Detailed instructions would be great but any info will help I have the diagram allready but dont really know what im looking at as far as what wire to conect to on the actual alarm.
Thanks, Frank
if you want that unit to activate when you lock, use the orange ground when armed wire from the alarm. the window module if i remember correct has an output that acts just as the orange wire on the alarm when the orange wire on the alarm is hooked up to the activation wire on the window module. use that output wire to connect back to your starter kill relay.
so i cant split that wire? and does any one have any idea how to connect to the windows? basically i almost need a step by step instruction. there is not a dealer in area that will do it for me. they all want u to buy from them and they don't sell anything that will work with my alarm
Actually, you have an INPUT and an OUTPUT. the orange ground when armed from the alarm will go to your roll up module activation INPUT. the OUTPUT of the window module will go to your starter kill relay. you can use the same orange wire from the alarm to trigger the window module AND use it for the starter kill also if you want to wire them like that, but you will need to diode isolate them if you do it like that.