08 frontier remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108884
Printed Date: May 13, 2025 at 8:15 PM

Topic: 08 frontier remote start

Posted By: uood8
Subject: 08 frontier remote start
Date Posted: November 13, 2008 at 11:49 AM

i added the dei 561t to my factory rke, i cannot for the life of me find the parking light flash in the dkp and when i go to remote start the vehicle it starts fine with the valet key in the ignition, however if i take it out of the ignition and hold it to the lock cylinder either front or behind the dash the truck will not start, so i see there is a keysense wire, what does that need to be connected to on the dei? and for the bypass some of the people on the frontier forum just grind down the valet key and tuck it underneth the dash with a wire wrapped around it and then lead it to the lock cylinder and wrap it around that. unless anyone has a better suggestion than by a bypass.

Replies:

Posted By: uood8
Date Posted: November 13, 2008 at 1:29 PM

well i got the lights up, pulled from the trailer tow wire which i didn't really want to do..but o well....now anyone about the key sense wire?

Posted By: mikvot
Date Posted: November 13, 2008 at 6:27 PM

The key sense doesnt get hooked up to the alarm.You need to make or buy a bypass..... I would spend the money and buy one.
To test everything until you get a bypass......put the key IN the ignition and then try to remote start. I'd it doesn't start, you have some other issues going on.

-------------