2006 impala and new passkey 3

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108888
Printed Date: May 14, 2025 at 8:45 AM

Topic: 2006 impala and new passkey 3

Posted By: Thack79
Subject: 2006 impala and new passkey 3
Date Posted: November 13, 2008 at 3:45 PM

Have worked on several Impala's (from 2000-05) that use passlock2 and I know how to bypass with a relay..... however now I have an 2006 with PasskeyIII. And reading on it I need to use the 556UW for the transponder in the key as well as I need to send a resistance value to start the car. Anyone have a relay set up for this. (I dont use bypass modules)

Thanks forum

Replies:

Posted By: ckeeler
Date Posted: November 13, 2008 at 4:31 PM

yes but you need an extra key. loop the wire around the key head and the antenna ring on the lock cylinder as many as you can. use smaller wire. the more wraps the better. ive done it many times. also grind off the bumps on the key so there is no usable key in the car a thief could find and use. sorry the crappy drawing isnt great but you get the idea.

posted_image

Posted By: enice
Date Posted: November 13, 2008 at 4:56 PM

Use a CANSL2. This will give you door locks, triggers, bypass and also the resistance(i think)

Posted By: ckeeler
Date Posted: November 13, 2008 at 5:07 PM

enice] wrote:

se a CANSL2. This will give you door locks, triggers, bypass and also the resistance(i think)

uuhhh, i think he said he doesnt use bypass modules.

Posted By: ckeeler
Date Posted: November 13, 2008 at 5:11 PM

Thack79 wrote:

Have worked on several Impala's (from 2000-05) that use passlock2 and I know how to bypass with a relay..... however now I have an 2006 with PasskeyIII. And reading on it I need to use the 556UW for the transponder in the key as well as I need to send a resistance value to start the car. Anyone have a relay set up for this. (I dont use bypass modules)
Thanks forum

and did you also need a relay setup for the negative start? i figured you would have that part nailed, so i just posted the transponder bypass.

Posted By: Thack79
Date Posted: November 14, 2008 at 9:37 AM

Yes I need the relay setup for the negative start so I know i have it right.. Havent done one with the No starter. Thanks man.

Posted By: ckeeler
Date Posted: November 14, 2008 at 10:10 AM

Can you give me an email address to send it to. i have it in a pdf. file

Posted By: Thack79
Date Posted: November 14, 2008 at 10:15 AM

pm'ed. thanks man