can i use 629l as main led?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108965
Printed Date: May 18, 2024 at 8:10 PM

Topic: can i use 629l as main led?

Posted By: niskyspy
Subject: can i use 629l as main led?
Date Posted: November 16, 2008 at 5:31 PM

I have Viper 791vx and I would like to find out if I can use 621L as main LED or only as additon with ground when armed output?

posted_image

Thank you

-------------
Infinity 1242, Kenwood 7202, Panasonic dec

Replies:

Posted By: howie ll
Date Posted: November 17, 2008 at 3:00 PM

No info on their site but looking at your picture, you only have black and red coming from the unit, therefore red to 12v+ and black to orange armed output from alarm, thus it won't work as a status LED.

Posted By: niskyspy
Date Posted: November 24, 2008 at 5:10 PM

Well, I bought it anyway and since there is no info on this product at all and I've searched for a damn long time. Here is the manual that this unit came with.
posted_image

-------------
Infinity 1242, Kenwood 7202, Panasonic dec

Posted By: ckeeler
Date Posted: November 24, 2008 at 5:18 PM

the manual is telling you the exact same thing Howie told you.

Posted By: niskyspy
Date Posted: November 24, 2008 at 5:26 PM

Yes, I know that. I bought an LED at RadioShack for the main LED and will have this just cuz its so bright and cool :). Here is a question for you though, what is the voltage at the main LED? I installed 12V but when I tested the output from the alarm it only shows 10V unless my Volt meter doesn't update fast enough.

-------------
Infinity 1242, Kenwood 7202, Panasonic dec

Posted By: ckeeler
Date Posted: November 24, 2008 at 5:50 PM

The output from the alarm is only 2v

Posted By: awdonly
Date Posted: February 24, 2009 at 6:32 PM

niskyspy wrote:

Well, I bought it anyway and since there is no info on this product at all and I've searched for a damn long time. Here is the manual that this unit came with.

Has anyone tried RANDOM mode - what patterns does it display?

Print Page | Close Window