92 honda accord, alarm/keyless
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108983
Printed Date: April 29, 2024 at 4:37 AM
Topic: 92 honda accord, alarm/keyless
Posted By: crv2005
Subject: 92 honda accord, alarm/keyless
Date Posted: November 17, 2008 at 9:06 AM
Hi, I am looking for the location of the RED / black parking lights on a honda accord 92 ex automatic. I know it is around the fuse box, but I cannot seem to find it. I have found a RED / black with silver markings. Wondering on which plug it is? can anyone help!
Replies:
Posted By: ckeeler
Date Posted: November 17, 2008 at 11:22 AM
do you have a DMM to test the wire?
Posted By: crv2005
Date Posted: November 17, 2008 at 12:57 PM
Yes, put I also took out the plug where the wire is plugged , and the lights still went on
Posted By: ckeeler
Date Posted: November 17, 2008 at 1:01 PM
That doesnt matter because there is more than one place where it is connected to power. the location you are trying to get them at is just one suggested location. and so what does the wire read when you test it?
Posted By: mikvot
Date Posted: November 17, 2008 at 3:14 PM
Pulling the plug , isnt the best way to test for a wire, as ckeeler already mentioned. If you cant find it by the fusebox, you can also get in the drivers kick.
-------------
Posted By: crv2005
Date Posted: November 17, 2008 at 4:26 PM
Okay I probed it and it tested 11.6V. Now When I removed it, the dash lights did not work but the Parking lights still worked. What you are saying i that if I put 12v, it will light up my parking lights ans dash lights?
Posted By: ckeeler
Date Posted: November 17, 2008 at 4:29 PM
crv2005 wrote:
Okay I probed it and it tested 11.6V. Now When I removed it, the dash lights did not work but the Parking lights still worked. What you are saying i that if I put 12v, it will light up my parking lights ans dash lights?
Thats exactly what we are saying. give it a try using a lead with a fuse in it just to be safe. connected to 12v and connect the other end to the suspect wire. the park lights should come on. use a 5 amp fuse too when you test it. let us know and good luck.
Posted By: mikvot
Date Posted: November 17, 2008 at 4:31 PM
You should never remove a plug when testing for wires, especially on newer vehicles. Leave the plug in. Probe the wire with lights off. It should read no voltage. When you turn the swith on, it should show around 12 volts.
-------------
Posted By: ckeeler
Date Posted: November 17, 2008 at 4:36 PM
mikvot wrote:
You should never remove a plug when testing for wires, especially on newer vehicles. Leave the plug in. Probe the wire with lights off. It should read no voltage. When you turn the swith on, it should show around 12 volts.
i think thats what he was saying he did. of course i just read into it, so.......maybe i just thought thats what he did to test it.
Posted By: mikvot
Date Posted: November 17, 2008 at 4:36 PM
sorry...ckeeler ...you got it covered
-------------
Posted By: ckeeler
Date Posted: November 17, 2008 at 4:42 PM
ckeeler wrote:
i think thats what he was saying he did. of course i just read into it, so.......maybe i just thought thats what he did to test it.
well.......when he tested the second time that is. yea the first time he was testing it by unplugging it like you mentioned
Posted By: rfwave
Date Posted: November 17, 2008 at 6:43 PM
crv2005 , i think you are trying to turn the parking lights off , right ?
Posted By: crv2005
Date Posted: November 17, 2008 at 8:33 PM
I wasn't sure of the wire color from the wiring diagram. Therefore i removed the plug to notice what that the parking lights still worked. with the plug off. I replugged the plug and tested the wire, and it showed 11.6 volts. I am quite sure that it is the right wire now. I will try the test with the 5amps, it soons cool. I will report back.
Posted By: crv2005
Date Posted: November 17, 2008 at 8:35 PM
All this is for the remote start that i am installing.
Posted By: crv2005
Date Posted: November 18, 2008 at 8:01 PM
hi, I am installing alarm, but i cannot find the (-) lock/unlock wires for canadian honda accord exr 1992 automatic. diagram shows blk/red blk/wh on a 2/3 plug, or bottom of kick panel. for the sake of me i cannot find. these are the only two wires left for my install and i cannot seem to find them. anybody of a clue/picture. thanks any help would be appriciated.
Posted By: crv2005
Date Posted: November 18, 2008 at 9:03 PM
please disregard, i just found it, it was under the foot step, in kick panel
Posted By: elton_23
Date Posted: December 08, 2008 at 2:06 AM
everything seems to be working good still gotta move the shock sensor somewhere else i got a code alarm battery back up siren off ebay for like 8 bucks ......... also how does the aux mode on the remote work i was thinking about getting some strobe lights
Posted By: elton_23
Date Posted: December 08, 2008 at 2:10 AM
o wow i really goofed up i hit next topic by mistake instead of next page on the thread i started wish i could edit my messages not sure why ur not allowed to kinda weird
|