06 vw jetta tdi remote start wiring info
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109049
Printed Date: May 02, 2024 at 8:04 PM
Topic: 06 vw jetta tdi remote start wiring info
Posted By: desh187
Subject: 06 vw jetta tdi remote start wiring info
Date Posted: November 19, 2008 at 12:08 PM
Does anyone have any wiring info to install auto start on a 2006 VW Jetta Diesel?
Thanks
Replies:
Posted By: howie ll
Date Posted: November 19, 2008 at 1:32 PM
you are going to do this the old fashioned way, DMM and test. You wil probably better off using a CAN type unit and possibly a 556U
Posted By: Chris Luongo
Date Posted: November 19, 2008 at 7:44 PM
Audiovox (techservices.audiovox.com) has accurate wiring information. I did a 2007 Jetta gas engine, and all was accurate.
The CAN-SL-2 from Fortin (ifar.ca) will give you doorlocks, trunk, hoodpin, doorpin, and tach.
You'll still need to sacrifice the valet key for the remote start.
The hardest part about this car is taking apart the steering column, then the brain box that's on the underside of the column, and then you can get to the ignition wires.
(They run straight from the ignition switch, to that box, and then turn into data or something.....you can't get them in the harness coming down the column, only inside there behind that box.)
Posted By: extreme1
Date Posted: November 20, 2008 at 11:51 AM
you can grab ign and crank coming out of the black module strapped to the underside of the column.
-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
|