power door locks, alarm, chevy cavalier
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109066
Printed Date: June 10, 2024 at 1:20 PM
Topic: power door locks, alarm, chevy cavalier
Posted By: dc_automotive
Subject: power door locks, alarm, chevy cavalier
Date Posted: November 19, 2008 at 10:14 PM
i got a valet remote start and my car does not have power door locks so i bought a kit for it. how do i get the doors to work with my alarm? i tryed messing with the two wires that are coming out of the alarm the green and blue but no luck i don't know what i'm doing wrong if some one can please walk me thru so my doors can work with my alarm thanks.
Replies:
Posted By: wiring fool
Date Posted: November 19, 2008 at 11:05 PM
sounds like the blu and green are the lock and unlock wires or the door switch inputs to trigger the alarm?
-------------
eieiohztztzt
Posted By: dc_automotive
Date Posted: November 20, 2008 at 8:58 AM
yes they are. how do i wire it up so that when i push my alarm button to lock it locks. can you gide me how or which wires or if i need to use deidos or something.
Posted By: ckeeler
Date Posted: November 20, 2008 at 11:05 AM
Use this. this is how you must wire them up. 
Posted By: dc_automotive
Date Posted: November 20, 2008 at 10:17 PM
question on this Reverse Polarity the #30"s go to the actuators but i have a box that all the actuators feed of there. also coming out of that little box is two wires a white and brown. If i get a groung cable and touch brown the actuators move same if i touch the white. so where do i conect those two wires? and also the two wires coming out of my remote start blue and green where do i hook those up to? sorry about all the questions. i need some help!! THANKS!
Posted By: ckeeler
Date Posted: November 21, 2008 at 9:37 AM
dc_automotive wrote:
question on this Reverse Polarity the #30"s go to the actuators but i have a box that all the actuators feed of there. also coming out of that little box is two wires a white and brown. If i get a groung cable and touch brown the actuators move same if i touch the white. so where do i conect those two wires? and also the two wires coming out of my remote start blue and green where do i hook those up to? sorry about all the questions. i need some help!! THANKS!
It that is the case it sounds like the "little box" you speak of is actually a set of relays. hook the blue and green negative lock and unlock outputs from the alarm right to the brown and white wires. that will activate the relays and the actuators.
Posted By: dc_automotive
Date Posted: November 21, 2008 at 1:27 PM
i tried that but it did not work. so i don't know if i'm missing something else? and the remote start is a keyless. i have the Valet Remote Start Model # 561R what else can i do or hook up so it will work? thanks!!
Posted By: ckeeler
Date Posted: November 21, 2008 at 3:01 PM
But if you connect those wires directly to a ground the door lock actuators move like they should? they must need high current rather than the low current coming out of the units lock wires. You will need to use relays to step up the output from the 500ma from the keyless unit to a normal high current ground.
Posted By: dc_automotive
Date Posted: November 21, 2008 at 3:35 PM
ok so what i need to do is connect the relays like the figure you sent me
so on the 30#'s instead of connecting to the actuators just connect them to the brown and white on the box and that should take care of it. is that right? thanks once more.
Posted By: ckeeler
Date Posted: November 21, 2008 at 4:00 PM
its gonna be a tad different. gonna need to do it like this. 
Posted By: dc_automotive
Date Posted: November 21, 2008 at 11:05 PM
ok i did wire it up like you showed me on the last diogram. on #86 to alarm lock output i put the GREEN / WHITE (-) factory alarm rearm wire. now it locks fine with the remote control but i can not get it to unlock with the control. but if i hit the negative wire on it it disarms (opens) i also tried putting the GREEN/ black wire coming from the remote start unit on the other relay #85 to unlock but still no luck. the wires i have left on my remote start unit are: Blue (unlock); Green(lock); Greay/black (wait to start); WHITE/ Blue(activation Input); gree/black(factory alarm disarm). do i need to used or put together any of these wires to unlock the locks? or another way of wiring? thanks!
Posted By: ckeeler
Date Posted: November 24, 2008 at 9:33 AM
dc_automotive wrote:
ok i did wire it up like you showed me on the last diogram. on #86 to alarm lock output i put the GREEN / WHITE (-) factory alarm rearm wire. now it locks fine with the remote control but i can not get it to unlock with the control. but if i hit the negative wire on it it disarms (opens) i also tried putting the GREEN/ black wire coming from the remote start unit on the other relay #85 to unlock but still no luck. the wires i have left on my remote start unit are: Blue (unlock); Green(lock); Greay/black (wait to start); WHITE/ Blue(activation Input); gree/black(factory alarm disarm). do i need to used or put together any of these wires to unlock the locks? or another way of wiring? thanks!
the BLUE(unlock) and GREEN(lock) wires are the ones you should be using for the relays 85 and 86 pins.
Posted By: dc_automotive
Date Posted: November 24, 2008 at 10:51 AM
now how about the wires coming out of the black box for the door lock kit? those are the Brown & White? i don't use those? also i don't have to use any other wires coming out of the remote start? will it be best when i hook all these wires up to disconect the remote start hook up the wires and then connect the remote start back up? thanks!!
Posted By: ckeeler
Date Posted: November 24, 2008 at 10:59 AM
The brown and white will hook up to 87 on the relays. what other wires do you have left on the remote start?
Posted By: dc_automotive
Date Posted: November 24, 2008 at 11:03 AM
Greay/black (wait to start); WHITE/ Blue(activation Input); gree/black(factory alarm disarm). RED / white; WHITE/ red; GREEN / WHITE; light GREEN/ black;
Posted By: ckeeler
Date Posted: November 24, 2008 at 11:13 AM
you wont need any of those for your install.
Posted By: dc_automotive
Date Posted: November 24, 2008 at 11:21 AM
cool i'll try that! thanks alot for your time and help!
Posted By: dc_automotive
Date Posted: November 28, 2008 at 8:53 AM
can anyone tell me how can i know how to get a tech tip # 1041 for door locks from direct electronis. i'm not a member but it says on the installation manual to look @ tech tip #1041. can some one help me out with this one? Thanks!
|