Print Page | Close Window

members only newest auto wiring informati

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109068
Printed Date: May 24, 2024 at 8:37 AM


Topic: members only newest auto wiring informati

Posted By: wiring fool
Subject: members only newest auto wiring informati
Date Posted: November 19, 2008 at 10:59 PM

how about information between members for the newest autos being released wiring information that can't be found because the vehicles have just been released and the information trail isn't out yet  thanks a million



-------------
eieiohztztzt



Replies:

Posted By: mikvot
Date Posted: November 19, 2008 at 11:34 PM
All you have to do is post a year, make , and model.....you have some of the most knowlegable installers in the US, and the UK ( howie). Heck, we'll even help if you're not a "member"

-------------




Posted By: wiring fool
Date Posted: November 19, 2008 at 11:45 PM
2009 f150 no info from remote start company yet maybe in 2 weeks

-------------
eieiohztztzt




Posted By: mikvot
Date Posted: November 19, 2008 at 11:59 PM
Sign up for a free account at techservices.audiovox.com
I've a done a remote start, and a couple of alarms on 09 f150s off their info.

-------------




Posted By: i am an idiot
Date Posted: November 20, 2008 at 5:01 AM
     Battery          VIOLET/RED          (+)          IGNITION SWITCH          
     Ignition 1          WHITE/ ORANGE          (+)          IGNITION SWITCH          
     Accessory 1          VIOLET/GREEN          (+)          IGNITION SWITCH          
     Starter 1          BLUE/WHITE          (+)          IGNITION SWITCH          
     Key Sense          BLUE/GRAY          (+)          IGNITION SWITCH          
     Parking Lights          VIOLET/WHITE          (+)          SJB CONNECTOR C2280E PIN 9          
     Brake Lights          VIOLET/WHITE          (+)          AT BRAKE SWITCH          
     Horn          BLUE/WHITE          (-)          STEERING COULMN HARNESS




Posted By: Chris Luongo
Date Posted: November 20, 2008 at 6:23 AM
You might also want to joint the Installer Mailing List. Lots of good conversation going back and forth there.

I think if you just google "installer mailing list" you will find it.




Posted By: howie ll
Date Posted: November 20, 2008 at 2:49 PM
Chris, do you still contribute (heavilly) to DEI's forum? I haven't been there in ages.




Posted By: preussen
Date Posted: November 28, 2008 at 2:23 AM

I'll add to the listed colors with some other info:

door lock-  grey / YELLOW- (-) polarity- driver's kick or SJB C2280c pin 17

door unlock- violet/grey- (-) polarity - driver's kick or SJB C2280c pin 4

dome light sense- grey/violet - (+) polarity - SJB C2280a pin 9

dome light on - GREEN/ blue - (-) polarity - interior dimmer switch

The listed location for the (+) park light wire as SJB C2280E will work, but I found an easier place was to tie in at the big wire connector, underhood, near the brake booster.  This one is attached to the inner fender, and I found it nice to just run the park light wire with the hood switch wire and make the connection here instead. It is still violet/white at this point. For those who are unfamiliar, the SJB in this truck is in the RH kick panel, which is a pain in the ass. I did find the lock/unlock wires in the LH kick area, but installing a Ford factory remote start with security requires you to run 6 wires over to the RH kick anyway, so I just run the lock wires there with the rest.  Other than going across to the other side, these are cake to install. Hope this helps a bit more.





Posted By: Slamminsubz
Date Posted: January 07, 2009 at 6:16 PM
Im getting conflicting information about the main wires for the 09 F150.

Audiovox is saying to get them at the PSC/ECU MODULE

Boa(DEI) is saying at the SJB

And in this thread is Ignition Harness.

Any idea what the best route is because if i can grab it all at the SJB, ill do all my connections there instead. Thanks.




Posted By: Slamminsubz
Date Posted: January 07, 2009 at 6:19 PM
actually i made a mistake, audiovox says to use the Ignition harness too. So far just DEI says the SJB for all the connections, but it seems strange to grab them from that,




Posted By: dtk1
Date Posted: January 07, 2009 at 7:06 PM
howie ll wrote:

Chris, do you still contribute (heavilly) to DEI's forum? I haven't been there in ages.
howie all you would get over there problem with new DEI products lol its sad but is true.




Posted By: Slamminsubz
Date Posted: January 07, 2009 at 7:21 PM
anyone know if Keysence is required on the 09 Fords? I dont like to wire it up unless i have to since i use the Compustar bypass.




Posted By: mikvot
Date Posted: January 07, 2009 at 8:09 PM
The only reason you would need the keysense wire on a Ford, is if you had someone that left a key in the ignition regularly. If the bypass saw a key in the ignition (keysense), the bypass would not power up, but the car will start because it sees the key in the ignition. If the car saw the bypass and the key at the same time, it would not start. Get it?

-------------




Posted By: Slamminsubz
Date Posted: January 07, 2009 at 8:44 PM
Sounds good. i was always under the impression that some cars might have a problem if you put the key in the ignition to take it over from remote start while the bypass is active, and since the compustar bypass doesnt have a keysence input, i thought i might need to relay it. Less work is always better Thanks. :)




Posted By: jabdelja
Date Posted: March 09, 2009 at 6:19 AM
how do i know which connector is which on the SJB is there labels...im lookin for the dome light and door trigger




Posted By: jabdelja
Date Posted: March 09, 2009 at 6:36 AM
Also i have almost everything hooked up....when i lock the car with the viper remote the dome lights stay on....which is the reason the door trigger isnt working...how do you make it so that the dome light turns on when you unlock the car and off when you lock the car....do you have to find the factory alarm and hookup the disarm and arm functions???If so where are they and what color.
-Thanks





Print Page | Close Window