looking for good installer

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109122
Printed Date: May 15, 2025 at 3:01 AM

Topic: looking for good installer

Posted By: tsremodel
Subject: looking for good installer
Date Posted: November 21, 2008 at 4:04 PM

Hey guys. Just like to say what a great site this is.

I've installed a few alarms and a remote starter in the past but now looking to hire someone to install one in my 05 ford e350 box truck. I got the alarm/starter right now its a Pro9775t says on the box but the unit model says its a pro9800. I know its a good working starter / alarm seeing it was pulled from a buds truck before trading in. I don't have much in the truck no power locks no trunk, but would like to pin the rear doors.

I am located in Southington Connecticut and hoping to get it installed over the weekend :) I know I'm not asking for much. Is there any good installers located near me? I hold a e-1 and own a remodeling company so I got all the tools if needed.

Replies:

Posted By: another-kelly
Date Posted: November 21, 2008 at 6:05 PM

https://www.the12volt.com/installbay/findinstaller.asp

Posted By: tsremodel
Date Posted: November 21, 2008 at 7:47 PM

Thanks

Posted By: tsremodel
Date Posted: November 21, 2008 at 8:55 PM

Well after leaving a message, and doing some research I am now thinking maybe I'll just do it myself. I guess my question is what do I need to start a 2005 Ford E-350 superduty with a gas engine and automatic tranny. Pursuit Pro-9800

I got most of it figured out so far but my first question is does accessory heater blower 2 need a relay? And should I power the relay from IGN3?

Thanks for the help guys.