Print Page | Close Window

autopage rs 622 programing

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109160
Printed Date: May 12, 2025 at 9:33 PM


Topic: autopage rs 622 programing

Posted By: Duston
Subject: autopage rs 622 programing
Date Posted: November 23, 2008 at 9:54 AM

Hello everybody, its been awhile sence i've posted something but I need some help if you can please. 

Problem with the Autopage rs-622 remote start 2 -way / keyless entry, hooked up unit in a 2007 Jeep Patriot and bought the ( xk-532 ) bypass, mux 2nd wire and acc wire with locks. The unit works fine locking and unlocking, lights work, horn works, but I can not start because I have to learn the tach or use the voltage option, and I want the keyed on off for the lock and unlock off.  So the problem is I can not get it to go into program mode?  Tried on and off 3 times leaving it off and push the program button 5 times holding on the 5 push, then the unit pages my 2-way remote?

Also the yellow wire is not conected to any thing becasue the car has a special start and acc wire. So I even tried jumping the wire to the acc and ignition wire and still did'nt work but it went into valet mode. Any help would be great, thanks..



-------------
Factory security systems suck!



Replies:

Posted By: Duston
Date Posted: December 06, 2008 at 5:56 PM
problem fixed guys, I was not turning the key fast enough. 

-------------
Factory security systems suck!


Print Page | Close Window