avital 4103 with 1700g

Hello I am working on an 2002 gmc envoy sle

I hooked up remote start last night, It worked fine, this morning I had a dead battery, jumped truck and now remote start does not work, help please

1700g wiring as follows

red to red on ignition switch

Black to Ground

GREEN/ black to green on door lock wire harness on 4103

light blue to blue door lock harness on 4103

blue to blue/white on H2 remote start harness, I had it to orange (ground when locked) Is that why my battery when dead?

purple to obd connector (soldered)

all other wires unused

On avital 4103 heavy gage relay

red to red @ ignition switch

red to RED / white

pink to pink

purple to yellow

orange to orange

pink/white to white

4 pin salellite harness NOT USED

door lock harness

green to GREEN/ black on 1700g

blue to light blue on 1700g

H2 remote harness

BLACK/ white to ground

brown to brake light switch

blue/white to status wire on 1700g

violet/white and gray NOT used

Primary harness H1

black to ground

brown (-) horn output to + parking light brown wire in left kick panel (why I have know idea) I have sense cut that wire so only wire I am using in that harness is the black one.

The led on 1700g comes on when I push the program button, but zero lights come on, on the 4103 avital do you think I burned up the control unit or is there a way to reset the unit after battery failure, plaese help

Thanks in advance dan