Print Page | Close Window

how to sync 489v

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109253
Printed Date: May 10, 2025 at 10:29 AM


Topic: how to sync 489v

Posted By: hypnotik714
Subject: how to sync 489v
Date Posted: November 26, 2008 at 2:03 AM

I have a two way LCD pager for my viper alarm and for some reason its not synced to the brain anymore. i was wondering if anyone had the installation instructions the device comes with when it is brand new. If not, would anyone know how to program it? The funny thing is that my other one way pager works just fine and when i lock my car, the two way pager displays the lock sign. For some reasont the two way isnt sending the message to the brain. So i need to sync the remote but dont know how to go about it..




Replies:

Posted By: kgerry
Date Posted: November 27, 2008 at 3:58 PM
hit the lock button 3-4 times is how you do it... or unplug the antenna connection for a minute or so and re-connect it...

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979


Print Page | Close Window