chrysler concorde&dodge intrepid install?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10929
Printed Date: May 30, 2024 at 3:25 AM
Topic: chrysler concorde&dodge intrepid install?
Posted By: 2vmodular
Subject: chrysler concorde&dodge intrepid install?
Date Posted: March 15, 2003 at 1:37 PM
Anyone have some remote starter installation tips/tricks for the early 93'-95' "cab forward" chrysler concordes & dodge intrepids?
The underdash panel under the steering column is not a seperate removable panel like on most vehicles. Removing the bottom half of the dashboard that spans the entire width of the car adds a large amount of time to the installation.
Replies:
Posted By: Velocity Motors
Date Posted: March 15, 2003 at 4:47 PM
Just have to work on your back for this vehicle. Pull all the necessary wire down and watch out for the metal when stripping (+) wires. The door lock wires are a real pain to get at in the upper portion of the driver's kick panel. Use your soldering iron to melt the insulation instead of trying to get your wire stripper in there because it won't happen.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|