ignition locking
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10933
Printed Date: July 21, 2025 at 10:40 PM
Topic: ignition locking
Posted By: Cherokee95
Subject: ignition locking
Date Posted: March 15, 2003 at 4:08 PM
my alarm says if i program it then when i turn the key to ignition the doors will lock, and when i remove the key they will unlock. I programmed it, however the door do not lock when i turn the ignition, the doors do unlock when i remove the key. If you have any idea on what is going on can you please help.
Replies:
Posted By: draasch
Date Posted: March 15, 2003 at 4:54 PM
do you have the right door wire hooked up? its a neg door trigger. the wire is yellow. most alarm wont lock the doors if the domelight is on. try it with the doors closed and then turn the key on slow to see what happens. good luck, david ------------- Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Posted By: Cherokee95
Date Posted: March 15, 2003 at 5:08 PM
i got a doorlock converter to convert the locks from neg to pos.
Posted By: Cherokee95
Date Posted: March 15, 2003 at 5:16 PM
everything works fine the locks open and close fine except for locking with ignition
Posted By: draasch
Date Posted: March 15, 2003 at 5:21 PM
did you double check the programing?is there a delay on your domelight??if so, sit inside the car and wait til the lights goes out and then try turning the key and see what happens.
Posted By: Cherokee95
Date Posted: March 15, 2003 at 5:51 PM
i didnt connect the domelight to the alarm unit, and i programmed the thing the way it said
|