Print Page | Close Window

2008 mazda 3, door locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109360
Printed Date: June 13, 2024 at 6:52 PM


Topic: 2008 mazda 3, door locks

Posted By: slicksam
Subject: 2008 mazda 3, door locks
Date Posted: November 30, 2008 at 7:37 PM

I have a customer that bought a 2008 MAZDA 3 DEMO, which did not come with powerlocks.

I installed the remote starter, He asked me if I can install doorpumps in each door. I have done many cars before, but when I took apart the door panel I noticed it was a cable not a rod like the older cars.

I am sure it is still possible to do. I was wondering if someone already has done this job.

Here is a pic of the inside of the driver door.

https://img366.imageshack.us/img366/84/dsc02119modzq6.jpg



-------------
Testing is the key



Replies:

Posted By: Twelvoltz
Date Posted: November 30, 2008 at 7:58 PM
The DEI 524CL cable lock adapters can be added to standard aftermarket actuators for cable locking systems.

-------------
Installer, IT support, and FFL. I need less hobbies.


Print Page | Close Window