xk01 with 2004 yukon
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109390
Printed Date: May 04, 2024 at 3:32 AM
Topic: xk01 with 2004 yukon
Posted By: bounty21
Subject: xk01 with 2004 yukon
Date Posted: December 01, 2008 at 9:05 PM
i'm trying to get this thing 2 work i can get it to start for 3 sec then shuts off i have a 1400 xp python and the xk01 mod i cann't get the light to blink at all when pressing the button on the mod like it says can some one tell me and info on this
Replies:
Posted By: brhaugen
Date Posted: December 02, 2008 at 6:34 AM
It is acting like it is not bypassing the security key.
Do the door locks work?
If so, make sure you have attached the ground while running from the RS.
If you are not getting door locks, make sure you have attached to the correct databus wire.
Reset the unit and reprogram it.
If you still get nothing, re-flash the unit with the latest firmware for your vehicle.
If still noting, the unit must be bad.(happens on occasion)
-------------
Brent Haugen
Fargo, ND
Posted By: bounty21
Date Posted: December 02, 2008 at 10:17 AM
door locks don't work but the horn does i cann reprogram the mod they didn't give me the hub with the mod
Posted By: brhaugen
Date Posted: December 02, 2008 at 11:33 AM
Does it have the correct firmware for your vehicle?
It should be the AMDL 6 for your truck.
It should be printed on the label.
-------------
Brent Haugen
Fargo, ND
Posted By: 32valvefox
Date Posted: December 02, 2008 at 8:51 PM
ive had a similar issue before. is your data wire soldered?
Posted By: bounty21
Date Posted: December 06, 2008 at 8:43 AM
thanks got it working got a replacement mod the other was bad
|