08 ram and ib uch2gx no crank
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109395
Printed Date: May 02, 2024 at 2:01 PM
Topic: 08 ram and ib uch2gx no crank
Posted By: saint1000
Subject: 08 ram and ib uch2gx no crank
Date Posted: December 02, 2008 at 6:44 AM
doing a rs on a 08 ram with an omega ib-uch2gx and i get no crank. i have the rs starter wire run to the violet wire on the bypass module and the violet/white wire taped in to the violet/brown on the truck. but get no output. i tried another module with no luck. the ignition comes on but no security light and no crank. i know the transponder programed ok because i can start the truck with a key with no transponder in it with the bypass held next to it. i have the pink wire of the bypass hooked in to ignition and pink/white hooked to alarm dia arm of the remote start. any ideas?
Replies:
Posted By: saint1000
Date Posted: December 02, 2008 at 10:16 AM
anyone?
Posted By: racerjames76
Date Posted: December 02, 2008 at 10:32 AM
post the specs on the ram.. 1500? Sounds like there may be a positive starter wire as well as the MUX wire. Audiovox says at module under hood but it also says do not use this for remote start applications. Hopefully someone will chime in with more info.
Posted By: saint1000
Date Posted: December 02, 2008 at 10:46 AM
it is a 1500 with the hemi.
Posted By: darkmobius
Date Posted: December 11, 2008 at 3:44 PM
do you have a yellow or yellow/orange wire in the ignition harness? If so you have a starter 1 wire that needs to be energized at the same time as the violet wire on the bypass.
|