2 wire actuator wiring?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109433
Printed Date: July 05, 2025 at 4:55 PM

Topic: 2 wire actuator wiring?

Posted By: bigfella444
Subject: 2 wire actuator wiring?
Date Posted: December 03, 2008 at 6:53 AM

Hey Guys,

Hopefully someone can help me out, im after a wiring diagram on how to wire a 2 wire locking actuator into a car that is controlled by a switch for the driver. I have taken on a job of making a child lock in the back of a ford remotely controlled in the front, the locking actuator is in and ready but i just need to wire it all up?! Electrics arent really my thing unless theres a diagram to follow.

Thanks

Phil

Replies:

Posted By: ckeeler
Date Posted: December 03, 2008 at 10:32 AM

Posted By: bigfella444
Date Posted: December 03, 2008 at 10:35 AM

Superb!!!! Thanks Pal!!

Posted By: howie ll
Date Posted: December 03, 2008 at 11:55 AM

Or take a (Spal type) 5 terminal window switch, no relays required.Sorry CK, just realised you're in UK, go to a scrapyard and find an early Ren. Clio, pull the lock switch from the centre console if it's adjacent to the gear shift./ cig lighter. It comes with an attatched loom, cut that and wire as follows:-centre = 12v+ fused at 10amps, next two outers to ground, outside pair to solenoid. Make sure the solenoid travels freely.

Posted By: ckeeler
Date Posted: December 03, 2008 at 11:59 AM

i like your idea better anyway Howie.

Print Page | Close Window