Print Page | Close Window

clifford avantguard 5.0

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109487
Printed Date: July 07, 2025 at 5:53 AM


Topic: clifford avantguard 5.0

Posted By: fnkytrd
Subject: clifford avantguard 5.0
Date Posted: December 04, 2008 at 11:43 PM

Anybody have this alarm. I have it installed in my 05 Tacoma and I got everything working except the 2nd window module. My first DEI 529T works great my second one that controls the rear will do the roll down but wont roll up when the alarm is armed. Has anyone had this problem.   I am also wondering if anyone has been able to change the pulses for the programing. I wanted to have the vehicle chirp once for arm and 2 times for disarm, but default is set to opposite. I've been fooling around with the programing for a while now and just cant seem to make it work properly.



Replies:

Posted By: stanward
Date Posted: December 05, 2008 at 2:05 AM

Hello,

I have the AG5 installed in my pickup truck.  However, I am using the Smart Windows 4 module, not the DEI 529T.

Have you thought of using the SmartWindows 4 instead?  My friend who is a Clifford rep said the SmartWindows is much better than the DEI 529T.

You can't modify the arm/disarm chirping.  Default is set for arm=2 and disarm=1.  I recall the Alpine alarms (back in the day) used to have arm=1 and disarm=2.

Stan





Posted By: howie ll
Date Posted: December 05, 2008 at 3:33 AM
Clifford always had 2 on and 1 off, there was even an internal controversy when DEI took them over to change it but they stood their ground.




Posted By: fnkytrd
Date Posted: December 05, 2008 at 10:17 PM
So what does that mean...  I don't get it... is there something wrong with the alarm?




Posted By: stanward
Date Posted: December 06, 2008 at 3:52 AM

There is nothing wrong with your alarm.  The chirping is default like that for Clifford line of alarms (non DEI stuff).

Stan






Print Page | Close Window