01 cavalier keyless entry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109550
Printed Date: September 10, 2025 at 9:39 PM

Topic: 01 cavalier keyless entry

Posted By: dksob81
Subject: 01 cavalier keyless entry
Date Posted: December 07, 2008 at 8:06 AM

01 Cavalier. I am installing a Remote Start/keyless entry on a buddy car. I got around the PASSLOCK II security system but I cannot figure out how to wire the keyless entry part. From what I have read this system is TYPE A (factory Keyless entry) which is positively triggered, so i connected the positive unlock/lock wires from the system to the White wire and Lt. blue wire in the driver kick panel and when I try to remote lock or unlock nothing happens. Do I have this connected right?

Joe

Replies:

Posted By: ckeeler
Date Posted: December 07, 2008 at 9:37 AM

did you test the wires?

Posted By: soundnsecurity
Date Posted: December 07, 2008 at 12:30 PM

you might need relays

-------------

Posted By: dksob81
Date Posted: December 07, 2008 at 2:47 PM

Yes, I tested the wires and I have them conencted correctly.

I figured it out tho, There are 3 sets of wires (for each lock and unlock) Common, closed (input) and open (output). Well I forgot to connect the input wires to 12v.

Print Page | Close Window