2008 gmc yukon add 2 way alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109584
Printed Date: May 03, 2024 at 10:52 PM

Topic: 2008 gmc yukon add 2 way alarm

Posted By: window
Subject: 2008 gmc yukon add 2 way alarm
Date Posted: December 08, 2008 at 4:26 PM

wondering if their is a way to add 2 way alarm to car with factory remote start

Replies:

Posted By: tedmond
Date Posted: December 08, 2008 at 6:47 PM

any alarm can be added to a car. however, you will loose the function to auto remote start it since factory units dont have input triggers. what you can do is wire up the 2way pager, have the installer or diy break a remote apart, use the aux output from the alarm to trigger a relay, completing the circuit from the remote and it will start.

Posted By: Hornshockey
Date Posted: December 10, 2008 at 12:35 PM

Bypasskit makes an add-on 2-way that will control the factory remote start as well as the factory alarm. Basically a range extrender for the factory system with 2-way confirmation

https://www.bypasskit.com/categories.aspx?catid=7

Or if you want to add on an entire aftermarket 2-way alarm, the XK01 will control factory remote start if it's paired with one of the newer DEI alarm/remstart combos.

-------------
Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.

Posted By: jnichols
Date Posted: May 10, 2009 at 11:43 PM

I want to do this with a GMC 2007 NBS Duramax truck. I've been told that the bypass modules will not start this particular vehicle however. Is this true, or has someone made it work? I really don't want to lose all the cool HVAC features of the factory remote start system, but would love to have the two way fob and true alarm features.

Thanks in advance!