Print Page | Close Window

fortin key override all bypass module

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109587
Printed Date: May 12, 2025 at 10:37 PM


Topic: fortin key override all bypass module

Posted By: rugerm44
Subject: fortin key override all bypass module
Date Posted: December 08, 2008 at 7:24 PM

Is there anyone out there that has installed a fortin key override all bypass module on an 05-09 toyota tacoma?The instructions for this thing might as well be written in french.Step by step information is what I need.It was advertised as being simple to install.Im going to put a viper 560xv on my 06 tacoma and need to bypass anti theft sys on it.Any help would be gratefully appreciated.Thanks

-------------
ruger



Replies:

Posted By: mikvot
Date Posted: December 09, 2008 at 10:46 AM
Go to www.ifar.ca   Look up the ko all, and under files you will be able to get vehicle specific install instructions.

-------------




Posted By: rugerm44
Date Posted: December 09, 2008 at 5:35 PM
Found it.It says to hook the blue wire to neg while running.Where would I find this neg output while running?By the way thanks for the help.Im just trying to get my ducks in a row before I start installing thi thing.

-------------
ruger




Posted By: mikvot
Date Posted: December 09, 2008 at 6:48 PM
Hook it up to the blue (-) status output of your remote start.

-------------




Posted By: rugerm44
Date Posted: December 10, 2008 at 1:30 PM
Thanks alot.When my sprained ankle heals up I will give it a shot.Thanks again.

-------------
ruger





Print Page | Close Window