new charger,300,town, country remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109616
Printed Date: May 14, 2024 at 1:19 AM

Topic: new charger,300,town, country remote start

Posted By: hydrodancer91
Subject: new charger,300,town, country remote start
Date Posted: December 09, 2008 at 6:48 PM

does anyone know if theres a bypass kit available that works for these vehicles that does not require soldering to the ignition circuit board? any help would be great

Replies:

Posted By: mikvot
Date Posted: December 09, 2008 at 8:12 PM

Check Idatalink out. I know they were coming out with a full bypass/interface that does not require soldering at the key cylinder. If you are just looking for the bypass for (remote start only) idatalink also has that, and it doesn't require soldering on the board.

-------------

Posted By: robertsc
Date Posted: December 09, 2008 at 8:32 PM

bypasskits has one chwrf and a pkucg2x https://www.bypasskit.com/getdocument.aspx?documentid=970

and fortin has one two but it only works with certain d2d starters

Posted By: hydrodancer91
Date Posted: December 10, 2008 at 8:36 AM

all the idatalink pieces require soldering. ive talked to the tech guys there and they said they are looking into making a solderless kit.

ill check out that express kit. i know in the past ive had a few issues with the chrysler ones not learning the car correctly hopefully they have corrected this

Print Page | Close Window