remote start keeps blowing fuse

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109620
Printed Date: May 14, 2024 at 1:41 PM

Topic: remote start keeps blowing fuse

Posted By: carpmaster
Subject: remote start keeps blowing fuse
Date Posted: December 09, 2008 at 9:03 PM

I have a 2001 Chry. Town and Country that I am installing a remote start in and it keeps blowing one of the main fuses for the RS when I try to start it. I also have a question on the a specific diagram for the MUX relay on this van. I have a seen to posts for the direct fax 1083 document but have had no luck finding a way to view it.

RS is a scytek rs300 and a flashlogic fl531

any help would be great

thanks

Replies:

Posted By: cdx280
Date Posted: December 09, 2008 at 11:39 PM

Sounds like your relay could be wired up wrong. You do have a relay in there for the ign/starter wires right?

Posted By: carpmaster
Date Posted: December 09, 2008 at 11:46 PM

I finally got it. I hate Chrysler.

Print Page | Close Window