underbody neons

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109639
Printed Date: May 05, 2025 at 1:23 AM

Topic: underbody neons

Posted By: dwofford
Subject: underbody neons
Date Posted: December 10, 2008 at 9:41 PM

i am going to get some unerbody neons and i want to have them on only when remote started and on a switch inside the cab. on a hornet 564t what wire would i hook to to make this happen?

Replies:

Posted By: mikvot
Date Posted: December 11, 2008 at 12:42 AM

I would use the orange (-) 200 ma second acc. wire to power a relay to the neon.

-------------

Posted By: dwofford
Date Posted: December 11, 2008 at 6:18 PM

will that make them come on when its running without having to push any other butons on the remote. I thought there was a wire that was for when running

Posted By: soundnsecurity
Date Posted: December 11, 2008 at 7:04 PM

you could hook it to the status output or ground when running, this is the thin blue wire that normally is for the bypass.

-------------

Print Page | Close Window