new viper models

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109682
Printed Date: May 10, 2025 at 11:33 PM

Topic: new viper models

Posted By: robertsc
Subject: new viper models
Date Posted: December 12, 2008 at 10:01 AM

i.ve done 3 so far

can't get to tach programming through the menu i can only get item 123 and not 4

i can program a 5501 to 24 min run time

but the remote an vehicle only runs 12 minutes

Replies:

Posted By: kassdog
Date Posted: December 12, 2008 at 10:58 AM

Been installing them for a bit now. The only problem i have seen with them is ocasionally the two way remote will just flat out now work(out of the box) or that the virtual tach never works. It will crank once, not work then crank a second time and start right up.

Posted By: kgerry
Date Posted: December 12, 2008 at 1:15 PM

if you learn tach and the blue light comes on it automatically sets tach in the programming menu without you having to program it.....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: robertsc
Date Posted: December 12, 2008 at 4:20 PM

thats what i though

phoned tech support and i guess they are un aware of this

anyways got my update bitwriter chip today

i'll have to give it another try

i think the remote programing for the 5901 is way to overdone

could they have made programming a remote more complicate

Posted By: robertsc
Date Posted: December 13, 2008 at 8:31 PM

programmed to 24 minutes with the bitwriter

Print Page | Close Window