Print Page | Close Window

hummer h3 doorlocks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109725
Printed Date: May 21, 2024 at 1:15 PM


Topic: hummer h3 doorlocks

Posted By: Bikergt99
Subject: hummer h3 doorlocks
Date Posted: December 14, 2008 at 12:41 AM

Alright guys i need somebodys help here i did a python872 in a 2007 hummer h3. used the 556l for the passlock interface for the remote start grabbed my door triggers and diode isolated them at the passenger kick, grabbed my keyless entry wires from the drivers door harness coming in to the car. everything worked beautiful. put the car back together made sure everything worked. went to test the factory remote hit lock the car wouldnt start at first had to discount the bypass now the power locks dont work at all and the drivers window doesnt work. I really hope somebody can give me some input and help me out.



Replies:

Posted By: Bikergt99
Date Posted: December 14, 2008 at 9:54 PM
Well just let everyone know i figured it out and evidently the new GMs computers are very touchy and if they feel somethings hooked up wrong they kinda go hay wire. so i disconnected the battery and reset the BCM/PCM and let it sit for awhile it will work it self out. bad news is i had to take everything and disconnect all the wires for it to do that.





Print Page | Close Window