Print Page | Close Window

code remote starter mdl goh pc2000

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109746
Printed Date: March 28, 2024 at 4:13 PM


Topic: code remote starter mdl goh pc2000

Posted By: agtonut69
Subject: code remote starter mdl goh pc2000
Date Posted: December 14, 2008 at 6:14 PM

new to this site , hoping some one can help me with a 2002 chevy cavalier that i just bought for the wife . it has a remote starter already installed in it , the only identfication on this unit is a bar code label  that says code alarm and goh pc 2000 .  it has a 2 button remote , both buttons say start. when i press start all it will do is flash the lights . can hear it click the relays inside the box but thats it .    is this something a do it yourselfer should try ?   i did look to see if there is a hood switch thinking may be it could be rusty , but there isnt  one ..... also no valet switch visable              any help would be great.....




Replies:

Posted By: t&t tech
Date Posted: December 14, 2008 at 7:35 PM
it won't be a pin switch problem otherwise the lights would never begin blinking, is the ignition coming on, could be a bypass problem,

-------------
JW.ORG.
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5




Posted By: agtonut69
Date Posted: December 14, 2008 at 7:58 PM
ignition is not coming on ,  no attempt to start ..... the lights only flash.....it looks like it has a dei bypass taped to it .   am i right to think its not a program problem as it is transmitting a signal to atleast  flash the dash lights and head lamps?




Posted By: soultinter
Date Posted: December 15, 2008 at 10:10 AM
try pressing both buttons at once a different button variations.





Print Page | Close Window