Print Page | Close Window

2006 honda odyssey remote start add

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109791
Printed Date: May 02, 2024 at 2:46 AM


Topic: 2006 honda odyssey remote start add

Posted By: afish70
Subject: 2006 honda odyssey remote start add
Date Posted: December 16, 2008 at 8:55 AM

     I have a friend that wants to add remote start to his wifes' 2006 Honda Odyssey. He wants to have a decent distance, 4th floor of a building and the vehicle around a block away. He would also like to have the remote to have confirmation (2 way). Can someone give me some ideas of good systems that won't cost a fortune? I am in the western suburbs of Chicago, we are looking for installation as well. All help and suggestions greatly appreciated.



Replies:

Posted By: jseibold
Date Posted: December 16, 2008 at 9:40 PM
prestige by audiovox make a telematics device that just plugs right in to the alarm/rs module.  you can use a phone to start the truck from anywhere-its kinda like ONSTAR. it won't show up on your 2 way remote but i've used these for quite a few people and they work good

-------------




Posted By: afish70
Date Posted: January 08, 2009 at 10:21 AM
well he had a Python 571Xp installed and now his factory alarm does not work. if he arms his factory system and then uses the pythin for remote start it sets off the factory alarm. how can i fix this? isn't there a way to use a module for making the python control the remote start, keyless entry and the factory alarm? help me out, please.




Posted By: loneranger
Date Posted: January 08, 2009 at 10:33 AM




Posted By: Hornshockey
Date Posted: January 13, 2009 at 3:41 PM

Sounds like the installer didn't hook up the factory alarm disarm wire.  The Python has a wire that, if hooked up properly, disarms the factory alarm prior to remote starting so the factory alarm wont go off.  In that van you have to run a wire through the door boot to the disarm wire, which is in the driver door. 

There's no module necessary to have what you're after.  You need to connect the disarm, lock and unlock wires from the Python to the corresponding wires in the van and you'll be able use one remote for lock/arm, unlock/disarm and remote start.  Then just put the factory remote in a drawer and use the python.



-------------
Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.





Print Page | Close Window