brake system error after remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109830
Printed Date: May 13, 2025 at 5:29 AM
Topic: brake system error after remote start
Posted By: h2oskierfl
Subject: brake system error after remote start
Date Posted: December 17, 2008 at 1:22 PM
Just did a remote start in a 2007 Silverado classic. Viper 791 with an XK01 taking care of the interface. Everything is functioning fine, but we now get ABS and parking brake lights randomly when starting remotely and with the key. The Error goes away as soon as you put the truck in motion, but something is definitely wrong. I did get the second ignition wire because I know that can cause codes if not connected. Tried DEI tech support and they had never heard of such a thing and the local Chevy dealer is no help at all. Any help would be greatly appreciated.
Replies:
Posted By: Mike M2
Date Posted: December 17, 2008 at 5:42 PM
I remember something about trucks with rear ABS needing the second accessory energized if the light comes on. If you haven't already, try connecting both the brown and orange ACC wires along with the two IGN wires...
-------------
Mike M2
Tech Manager
CS Dealer Services
|