561t dei old style dip switch settings
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109886
Printed Date: July 12, 2025 at 8:09 PM
Topic: 561t dei old style dip switch settings
Posted By: concepts99
Subject: 561t dei old style dip switch settings
Date Posted: December 19, 2008 at 5:55 PM
Hello,
I have an old 561T I ripped out and replaced with a combo unit. I want to reuse it. It has no layout on the back (OLD OLD 94-95 unit) -- I know one was for cylinders and one setting was for tachless mode.
Does anyone have an old manual or remember what the dip switch settings are?
Replies:
Posted By: JWorm
Date Posted: December 19, 2008 at 6:22 PM
I don't believe the 561t is that old. It came out sometime this century. The 551t was the older version of the 561t. I don't think that unit had the dipswitches either. Can you verify the model number?
From a Viper 550HF that was out about 1995...
dip switch ON position OFF position
1 Zero Cylinder Tach Input connected
2 Parking lights constant p. lights flashing
3 12 min runtime 24 min
4 Learn tach ON Learn tach OFF
Posted By: concepts99
Date Posted: December 19, 2008 at 7:04 PM
Just wanted to say thanks, you are correct. You jogged my memory now, it is a 551t. Hard to remember 14 years back!
|