compustar 2w9000fmr clicking noise
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109912
Printed Date: July 02, 2025 at 8:36 PM
Topic: compustar 2w9000fmr clicking noise
Posted By: isleepinadrawer
Subject: compustar 2w9000fmr clicking noise
Date Posted: December 20, 2008 at 8:09 PM
Hi, just got this installed
When im driving around, from time to time i hear a clicking noise...like a relay being switched.
It sounds like the same noise when i put the car into reservation mode.
anyone have this problem before? i should probably bring it back to the installer
Replies:
Posted By: jinstall
Date Posted: December 20, 2008 at 10:46 PM
could be a relay clicking when you hit the brake... not sure. I'm actually in the process of installing a comp right now and it's a bit of a noisy brain. the pro series are much quieter.
Posted By: isleepinadrawer
Date Posted: December 20, 2008 at 11:34 PM
i'll try driving it around and see if i can reproduce the relay action when i do something.
Posted By: dswift
Date Posted: December 21, 2008 at 10:35 PM
Sounds like the E-brake is seeing ground on constant. When you push the foot brake it does Takeover. So if you hold the foot brake and turn the key to the off position. The car will turn off. EVen with the E-brake up, You need to take it back to your installer for a check.
-------------
"dont ground out!"
|