Print Page | Close Window

window roll up module output

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109915
Printed Date: May 23, 2024 at 3:35 AM


Topic: window roll up module output

Posted By: Trent109
Subject: window roll up module output
Date Posted: December 20, 2008 at 11:03 PM

Hello,
I recently bought a vehicle (99 bravada) that came equipped with a remote starter. (Code alarm ca420). But it didn’t come with any remotes. so I did some research and found that the remote itself it’s like 50 bucks, and a new system WITH keyless entry is 75 off eBay brand new (code alarm ca501) the wiring loom is the same. But my question is about wiring in the window rollup module, I have supplied the wiring diagram and the link to get to the wiring diagram if it is unreadable. https://webappshttp.voxdmz.audiovox.com:1025/manuals/installation/CA500_DOC_IM.pdf

<a href="https://s39.photobucket.com/albums/e160/trent109/?action=view¤t=ca500.jpg"><img alt="image" src="https://i39.photobucket.com/albums/e160/trent109/ca500.jpg" alt="Photobucket"></a>

Would the blue/black wire be my "accessory" wire that would go to the window rollup module? Just want to be sure before I mess something up.



Replies:

Posted By: howie ll
Date Posted: December 21, 2008 at 10:36 AM
Haven't read the link but what you are looking for is a wire that grounds out when the alarm is turned on, i.e. an "armed output" to trigger (not power)  your window closers.


Print Page | Close Window