93 vw corrado window control mod

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109943
Printed Date: May 14, 2024 at 11:05 PM

Topic: 93 vw corrado window control mod

Posted By: pts_dbq760
Subject: 93 vw corrado window control mod
Date Posted: December 21, 2008 at 10:06 PM

I am putting in a Excaliber AL-1810-EDP 2-way remote/keyless/alarm with a window control module into a 93 VW Corrado for a customer of mine. I can't find any wiring information on the window circuit on omega's tech site. I am familar with directechs and I know they list info on a lot of vehicles window circuitry but, I don't have access to it anymore. I would just pulse the lock wire to roll the window up, but my customer wants to be able to roll the window up, down, and have the ability to vent the windows. If anybody has any input or some direction on what I should do, I would really appreciate it. Thank you.

-------------
Live 4 Everything Die 4 Nothing

Replies:

Posted By: howie ll
Date Posted: December 22, 2008 at 4:19 AM

Can't be done in theory, the control units are part of the motor assembly and you would have open them up if possible on a 15year old car to fit something like a 530t. The alternative would be if you had 2 aux outputs, leave the lock wire on .8sec lock and join an aux to it so that customer presses aux switch to close window however much, You could do the same to open windows and you might need a pair of relays because the lock and unlock wires are pos. After opening this would unlock the vehicle so you would have to relock.

Posted By: pts_dbq760
Date Posted: December 22, 2008 at 10:42 AM

Cool..thanks howie for your input..i will give ur idea that a shot

-------------
Live 4 Everything Die 4 Nothing