Print Page | Close Window

06 pt cruiser keyless entry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109961
Printed Date: May 19, 2024 at 11:37 PM


Topic: 06 pt cruiser keyless entry

Posted By: customworks
Subject: 06 pt cruiser keyless entry
Date Posted: December 22, 2008 at 4:30 PM

Having trouble with unlock from Prestige APS45B keyless entry.  Lock working good through 1K ohm resistor. Using 250 ohm resistor on unlock with no luck. I can get it to unlock by swapping door lock wires out of keyless entry module and hitting lock button on remote, but then no lock. This is on a 2006 PT Cruiser. Using light GREEN/ dk. green single lock wire.

Any suggestions???



-------------
customworks



Replies:

Posted By: soundnsecurity
Date Posted: December 22, 2008 at 4:51 PM
can you test the unlock output from the keyless module you are installing? if that output is busted after all then you might be able to rig something to the 2nd unlock or factory disarm wire if your unit has these. also you might need to use relays as a last resort.

-------------



Posted By: customworks
Date Posted: December 22, 2008 at 5:53 PM
Got it. Thanks. By mistake, I was on the 2nd door unlock output (RED / blk) instead of unlock output (red).

-------------
customworks


Print Page | Close Window