2006 f 250 gas remote start, alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109965
Printed Date: May 09, 2024 at 12:40 PM

Topic: 2006 f 250 gas remote start, alarm

Posted By: jantman
Subject: 2006 f 250 gas remote start, alarm
Date Posted: December 22, 2008 at 5:31 PM

Hi,

I've searched the forum and looked through the Ford Wiring Information page, but can't seem to find anything other than this post referencing a Diesel.

I'm looking for the diagrams required to install a keyless entry/remote start/alarm on my '06 F250 XLT CC gasser (with factory keyless entry). I don't know how much they differ from the diesel wiring in the post I found.

Can anyone point me to a source for the diagrams, or a thread if I've missed it? I'll be installing a DEI system, either Python or Viper.

Thanks,
Jason

Replies:

Posted By: Mike M2
Date Posted: December 22, 2008 at 5:34 PM

No difference other than the motor! Use the diagram you have....

-------------
Mike M2
Tech Manager
CS Dealer Services

Posted By: ckeeler
Date Posted: December 22, 2008 at 7:03 PM

Mike M2 wrote:

No difference other than the motor! Use the diagram you have....

hehe, just gotta give you a hard time here Mike, but......"motors" are electric, "engines" use internal combustion. posted_image

Posted By: Mike M2
Date Posted: December 22, 2008 at 9:31 PM

HA! Made me chuckle.....

-------------
Mike M2
Tech Manager
CS Dealer Services

Posted By: jantman
Date Posted: December 25, 2008 at 9:22 PM

Mike M2 wrote:

No difference other than the motor! Use the diagram you have....

Thanks. I wasn't sure how much of a difference there is...